Activating Tracfone Service on Verizon Networkīefore starting the activation process for a Verizon compatible SIM card, make sure you have obtained your IMEI number from the VP3-TM. Activation of an AT&T compatible SIM card does not require knowing the IMEI, so it is possible to activate an AT&T compatible SIM card and configure the VP3-TM remotely without ever physically connecting the configuration tool to the VP3-TM device. Activating a Verizon compatible SIM card requires connecting to the VP3-TM with the configuration tool (or terminal emulator) in order to read the IMEI from the device. You also have the option of using the 'Owner' command and beginning the configuration process via SMS as noted in Section 5. It is not a requirement that you connect via the configuration tool and verify SIM activation. Immediately after activating the SIM card, it is going to be a welcome message from TracFone. If a text message has been received, the 'show cell' command always displays the most recently received message. If connected to the network, it also shows the device's phone number and signal strength. The 'show cell' command shows the CCID and IMEI numbers. Then follow the steps here to activate the SIM.įollow directions in Section 6 for getting connected, and use the 'show cell' command to verify your SIM card activation. The first step in activating the pre-installed TracFone SIM card is to go to and create an account for yourself. Activating TracFone Service on AT&T Network The SIM card is ready to activate with any AT&T prepaid service or with the. 89xxxxxxxxxxxxxxxxxx) Note: You CAN NOT re-activate a sim card activated previously.

The plan will commence as soon as you add sufficient credit (e.g. Step 1 - Please enter the SIM Card number. You can do this in Australia before you depart, and at the end of the process you will be given your USA phone number. Before you head overseas, you will first need to activate your SIM on the AT&T website. Control Solutions can give you advice on that matter if applicable. This SIM card will fit Peplink devices that use full size sim card slots. USA AT&T SIM Activation Activating Your SIM Card. If you are planning to deploy a significant number of i.Report remote monitoring devices, you may want to consider creating your own commercial account with an M2M reseller that may offer volume plan discounts. We chose TracFone because their rates are very reasonable, and getting a SIM card activated is quick and easy with TracFone. TracFone is one of America's biggest prepaid service providers. The SIM card pre-installed is a TracFone SIM card. You will need to provide your own SIM card outside of the US. For use outside of the US, you should choose 'No SIM' when placing your order. You are given the choice of AT&T network or Verizon network when placing your order. The SIM card is installed but not activated. The i.Report VP3-TM devices are normally shipped with a SIM card pre-installed if shipping to a destination in the US (for use in the US).

At&t sim card activation